Product Details
This low profile wind-powered rotary roof ventilator provides ventilation for vans, buses, ambulances, 4x4s, boats and buildings. This van vent has been designed to protrude a maximum of 72mm above the vehicle's roof and low enough to fit under most roof mounted carrying racks, the 8 vaned air scoop rotates freely while the vehicle is in motion drawing out stale air. See extraction figures below.
The price you see is the price you pay - FREE DELIVERY (UK Mainland excl Highlands and Islands)
Low profile roof vent features
- Discrete, low-profile unit
- Tough ABS resin construction
- Cost-effective solution to the problems of excess heat and condensation
- Stainless steel spindle and 2 bearings
- Internal shutter (Allows air-flow to be shut off)
- 'Bond-On' Base - no fixings required
- Ultra reliable
- No maintenance required
- Weight - 1.2kg
- Available in black or white (select colour above)
| Wind Speed miles - km (per hour) |
Air Extraction Rate Cubic Ft - M (per min) |
|---|---|
| 12.5 - 20 | 25.5 - 0.71 |
| 25.0 - 40 | 52.0 - 1.48 |
| 37.5 - 60 | 82.0 - 2.33 |
| 50.0 - 80 | 112.2 - 3.17 |
| 62.5 - 100 | 144.6 - 4.09 |
| 75.0 - 120 | 175.4 - 4.95 |
Low profile roof vent fitting instructions
This low profile van vent is easy to mount - simply make a 130mm dia. hole and bond into place using suitable adhesive. Sika 552 (or similar) is recommended as it bonds well to a variety of substrates without the need of special surface pre-treatment. If other sealant adhesives are used (i.e Fastcure 2000, SEAL212FC, 221 or 252) suitable primers must be used. Recommended Sika primers: SEAL210T & SEAL215. No mechanical fixings are required.
